Results 1 - 10 of 61

• Evaluation of the Approach to Respirable Quartz Exposure Control in U.S. Coal Mines
  2/1/2012 - Peer reviewed journal articles
  The performance of the current regulatory approach was found to be lacking due to the use of a variable property - quartz content in airborne dust - to establish a standard for subsequent exposures.
• Evaluating Portable Infrared Spectrometers for Measuring the Silica Content of Coal Dust
  1/1/2012 - Peer reviewed journal articles
  Miners face a variety of respiratory hazards while on the job, including exposure to silica dust which can lead to silicosis, a potentially fatal lung disease.
• Benchmarking Longwall Dust Control Technology and Practices
  9/1/2011 - Peer reviewed journal articles
  Results from the NIOSH underground dust surveys and current longwall dust control technology and operating practices are discussed.
• Field Evaluation of the Coal Dust Explosibility Meter
  10/1/2008 - Peer reviewed journal articles
  This paper describes the testing and reliability of results of a NIOSH developed Coal Dust Explosibility Meter (CDEM), a hand-held instrument that uses optical reflectance to measure the explosibility of a rock dust and coal dust mixture.
• Equivalency of a Personal Dust Monitor to the Current United States Coal Mine Respirable Dust Sampler
  1/1/2008 - Peer reviewed journal articles
  The work presented in this paper focuses on the relationship between the PDM and respirable dust concentrations currently measured by a coal mine dust personal sampler unit utilizing a 10 mm Dorr Oliver nylon cyclone.
• Evaluation of the SKC® DPM Cassette for Monitoring Diesel Particulate Matter in Coal Mines
  12/1/2004 - Peer reviewed journal articles
  A commercial version of the BOM impactor, called the DPM Cassette, was recently introduced by SKC®. Tests were conducted to evaluate the performance of the DPM Cassette for measuring diesel-source elemental carbon in the presence of coal dust.
• Continuous Wave Laser Ignition Thresholds of Coal Dust Clouds
  8/1/2003 - Peer reviewed journal articles
  Laser-based instruments are used in areas where coal dust ignition presents a safety hazard. This NIOSH study determines when an optical beam may be considered a potential ignition source in underground coal mines or coal storage facilities.
• Coal Dust Explosibility
  1/1/1996 - Peer reviewed journal articles
  This paper reports US Bureau of Mines (USBM) research on the explosibility of coal dusts. The purpose of this work is to improve safety in mining and other industries that process or use coal.
• A Novel Sampling Cassette for Field-based Analysis of Respirable Crystalline Silica
  3/1/2021 - Peer reviewed journal articles
  A study evaluating a novel cassette designed to facilitate field-based, direct-on-filter analysis of RCS using transmission FTIR spectroscopy.
• Field Comparison of a Roof Bolter Dry Dust Collection System with an Original Designed Wet Collection System for Dust Control
  12/1/2020 - Peer reviewed journal articles
  A study comparing dry dust collection with a wet dust collection at one coal mine location.